Speed Simulation for Mobile Vuser Scripts

Speed Simulation models the behavior of a mobile network. This enables you to test applications, while taking into consideration end-to-end response time from device to server.

Three configuration options are available, allowing you to maximize the accuracy of your simulation:

  • Maximum Bandwidth
  • Standard Bandwidth
  • Custom Bandwidth

You set the bandwidth using the Speed Simulation Runtime settings as described below.

UI example
To access VuGen > Runtime settings > Network > Speed Simulation

User interface elements are described below:

UI Element Description
Use maximum bandwidth

Vusers run at the maximum bandwidth that is available over the network. This option is provided in cases where you do not wish to emulate a specific network. This is the default setting.

Use standard bandwidth
  • General Packet Radio Service (GPRS)
  • Enhanced Data rates for GSM Evolution (EDGE)
  • Universal Mobile Telecommunications System (UMTS)
  • High-Speed Downlink Packet Access (HSDPA)
  • High-Speed Downlink Packet Access Phase 2 (HSDPA phase 2)
  • High-Speed Uplink Packet Access (HSUPA)

Each network type has both a maximum and expected rate. The maximum rate represents the technology's best case performance rate while the expected rate more accurately reflects real time performance.

Use custom bandwidth

Sets a custom download and upload speed, defined in bits. You can set a single value or range for either the upload or download speed. A case where this option would be useful, is when you know the expected network speed from your cellular provider for a specific area.

Download speed:The download speed in bits, defined as a range or single value.

Upload speed:The upload speed in bits, defined as a range or single value.

Note:

  • If you select this option and either the upload speed or download speed fields are left blank, the empty value is automatically set to the value of the non-empty field.
  • If you select this option and leave the upload speed and download speed fields blank, the default setting of maximum bandwidth will be used.

Back to top